Engine Tune Power Price Requires
Sprinter 2.1L CDI (2014-2016)

Stock

161hp 265lb-ft

Stage 1

195hp 318lb-ft

749

Sprinter 2.7L CDI (2002-2006)

Stock

154hp 243lb-ft

Stage 1

165hp 260lb-ft

349

Stage 1.5

180hp 280lb-ft

349

Sprinter 3.0L CDI (2007-2009)

Stock

154hp 243lb-ft

Stage 1

173hp 300lb-ft

489

Sprinter 3.0L CDI (2010-2016)

Stock

188hp 325lb-ft

Stage 1

218hp 385lb-ft

649

Sprinter CDI, Any

Custom

599

OPTIONAL FEATURES

Engine Tune Description Standalone Price Price with Tune Purchase
Sprinter 2.1L CDI (2014-2016)

Remove DPF, Adblue, EGR, and/or Intake Swirl Flap

Off-road only. Note: 2009 ML and GL models may still have "0 starts remaining" message on the dashboard after removing the adblue system. The vehicle however will continue to start and run normally.

649 399
Sprinter 2.7L CDI (2002-2006)

Remove EGR

Off-road only 249 0
Sprinter 3.0L CDI (2007-2009)

Remove DPF, Adblue, EGR, and/or Intake Swirl Flap

Off-road only 349 0

Speed Limiter Removal

Raises the speed limiter to 82 MPH using factory diagnostic equipment

199 99
Sprinter 3.0L CDI (2010-2016)

Remove DPF, Adblue, EGR, and/or Intake Swirl Flap

Off-road only. Note: 2009 ML and GL models may still have "0 starts remaining" message on the dashboard after removing the adblue system. The vehicle however will continue to start and run normally.

649 399

Most orders are custom tailored and we prefer that you contact us by e-mail. We will be happy to produce a personalized invoice for you.

The published power figures are for reference only. Your results may differ


Additional Information

Flashing instructions:

2007-2009 Sprinter 3.0L CDIs and other Mercedes up to 2008 can be port flashed with FlashZilla

  • If you have FlashZilla v2, Pick Family 120.
  • If you have FlashZilla v3, Pick Family 130.
  • You can find general FlashZilla instructions here.

2010+ Sprinter CDIs and 2009+ Mercedes cars/SUVs require bench-flashing. You can book an appointment with one of our dealers. If the vehicle has "START and IDLE" messages on the dashboard due to a DEF/Adblue/SCR problem, then that must be reset before tuning.

2002-2006 Sprinter 2.7L CDI speed limiter removal requires the use of a MB Star diagnostics tool. We have one available for rental, contact us.

Deleting instructions:

2007+ Sprinters: If you install a DPF delete tune, then you must electrically unplug all DPF (downpipe) temperature and pressure sensors.

2007-2009 Sprinters: If you experience limp mode as a result of intake flap delete, then you can install a 4.7k to 5.0k Ohm resistor in the intake flap motor plug (click here for a picture). A 1k to 10k Ohm resistor may also work.

2010+ Sprinters:

  • MUST UNPLUG THE SCR CONTROLLER. Click here for a picture. The location of the adblue controller may vary. 
  • The NOx sensors and SCR (adblue) injector should be unplugged as well. 
  • If the DPF is also deleted, then unplug DPF pressure and temperature (EGT) sensors too.

© Copyright 2018 Malone Tuning Ltd. All rights reserved.